How to Store Hydraulic Log Splitter – 4 Steps to Save your Splitter!

A hydraulic log splitter is not necessarily an affordable piece of machinery. Once you have it, it is necessary to preserve it properly. While using it, you might follow the manual, but it is equally important to learn how to store hydraulic log splitter to ensure it remains in good condition.

Many people who own hydraulic log splitters do not know how to store them. That is why, today, we will share the answer to the question of how to store a hydraulic log splitter?

Once you use the step-by-step procedure below, storing it in the perfect spot in appropriate conditions will be easy.

Table of Contents

• How to store hydraulic log splitter?
  • Step 1: Cover it:
  • Step 2: Store it in a dry spot:
  • Step 3: Keep corrosive materials away:
  • Step 4: Ensure appropriate ventilation:
• Can you leave a log splitter outside?
  • Step 1: Use a cover:
  • Step 2: Move it to an even surface:
  • Step 3: Lift the tires:
  • Step 4: Keep pests away:
• Can you use a log splitter in the rain?
• Can you use a log splitter on wet wood?
• Will a log splitter split green wood?
• In Summary

How to store hydraulic log splitter?

The best way to store a hydraulic log splitter is to cover it. Check out the procedure below to do so. Additionally, you need to follow a handful of tips to store it correctly.

Step 1: Cover it:

The first thing is to buy a hydraulic log splitter cover. You can go with something like SELUGOVE Upgraded Log Splitter Cover suitable for indoor and outdoor storage and protects the hydraulic log splitter from any weather element. Once you cover the hydraulic log splitter appropriately, it is time to move it to the right spot.

Step 2: Store it in a dry spot:

Move the hydraulic log splitter to a completely dry spot. They should preferably be under a shade. Before you move it, clean the floor of any debris or any puddles of water.

Step 3: Keep corrosive materials away:

In case you have fertilizers or acid in the shed where you’re storing the hydraulic log splitter, keeping them away is a good idea. If even a limited quantity of such liquids comes in contact with the hydraulic log splitter, it can damage them. That is why keeping them away in a tightly sealed container is better.

Step 4: Ensure appropriate ventilation:

In the absence of proper ventilation, there might be moisture accumulation in the vicinity of the hydraulic log splitter. Eventually, this will lead to rust. It can lead to mold growth as well. The simplest way to avoid this problem is to ensure appropriate ventilation.

Keeping the door or windows open even slightly will ensure proper ventilation and, therefore, a dry atmosphere inside the shed. It will prevent rusting. That way, even if you store the hydraulic log splitter for months, it won’t get damaged.

Merely follow these four steps; you shouldn’t have a problem storing the hydraulic log splitter.

Can you leave a log splitter outside?

Yes, you can leave a log splitter outside but only for a limited time. It is not suitable to leave a log splitter outside for months together. Even if you’re storing for a short time, follow the procedure below.

Step 1: Use a cover:

The cover is a must whether you store the hydraulic log splitter outside or inside. You can go through the procedure above and buy the cover as step one suggests. That cover is suitable for indoor or outdoor storage.

While storing it outdoors, you must ensure that it is properly shielded against any weather element like UV rays, rain, etc. A large cover which is weather resistant should help you protect the log splitter pretty well.

Step 2: Move it to an even surface:

Covering and protecting the hydraulic log splitter becomes even more difficult if you keep it on an uneven surface. The chances of the cover shifting to one side are pretty high, especially when the hydraulic log splitter is left unattended for a long time.

To avoid this possibility, moving it to an even surface is better. When the wheels are at the same level, keeping the hydraulic log splitter covered is easy.

Step 3: Lift the tires:

After you have such a spot, buying a few wooden blocks is better. You can buy them or create them on your own. The purpose of these wooden blocks is to lift to the hydraulic splitter above the ground. You can prolong the life of the tires and ensure that dry rot does not occur. However, the wooden block should be such that they can keep the tires in place so that the log splitter remains stationary.

Step 4: Keep pests away:

Preparing the hydraulic log splitter can take a lot of time and money. When storing log splitters outside, there is always a risk of squirrels, mice, and rats damaging the log splitter. They can chew on the wires or the hose. The best way to keep them away is to use a repellent with a strong fragrance like menthol. You can spray it in the vicinity of the log splitter, and you wouldn’t have to worry about pests or rodents.

This simple four-step procedure will help you store the hydraulic log splitter outdoors.

Can you use a log splitter in the rain?

Yes, using a log splitter in the rain does not necessarily result in any issue. Observing the log splitter carefully usually consists of materials like stainless steel, plastic, rubber cords, and alloy steel. It is usually powder coated to ensure that it does not suffer from any rust.

The problem with using a log splitter in the rain is that the wood will get wet, and thereafter it is difficult to dry it. This is especially true when dealing with wood in large quantities. Also, your vision might not be that clear during rain, and the visibility might be low. That is why the chances of an accident increase significantly.

You must keep all these things in mind while using a log splitter in the rain.

Can you use a log splitter on wet wood?

Many people prefer to split wet wood so that it dries quickly. Even though splitting wet wood is not easy, a log splitter can deal with the same. Most log splitters are designed in such a way that they can split dry as well as wet wood.

Will a log splitter split green wood?

Your best bet to split green wood is using a hydraulic log splitter. While an ordinary log splitter might find it difficult to split green wood, hydraulic log splitter can handle almost anything. It can handle seasoned or any other type of wood as well.

In Summary

If you’re wondering how to store a hydraulic log splitter, just follow the procedure highlighted above, and you shouldn’t have a problem. Using the guide above, you can not only better understand how to store it but also how to use it.