MyLogSplitter.com

Category: Manual Hand Log Splitter

  • How to Sharpen Log Splitter Wedge

    How to Sharpen Log Splitter Wedge

    Last week I was using my log splitter wedge and I noticed that each split was taking longer and longer. After a quick inspection, I found that the wedge had blunted down quite a bit and wasn’t splitting quite like it used to. Sometimes it would even bounce off the wood.

    Once I’d finished sharpening the wedge, I said to myself –

    ‘I can’t be the only one with this problem’

    – Me

    So here we are, an article with specific instructions on how to sharpen log splitter wedge.

    Over time, all log splitter wedges will lose their sharpness. You will have to re-sharpen them – it’s just the way it is.

    Only after sharpening them will you get back to the original efficiency of the wedge.

    So, How to sharpen log splitter wedge?

    How to Sharpen Log Splitter Wedge
    Sledgehammer and a wedge splitting a birch log

    While the procedure to sharpen the log splitter wedge is easy, you will need a handful of things for the same. You have to 1st procure them before following the steps we will cover below.

    Things you’ll need:

    • Your blunted log splitting wedge
    • A coarse metal file
    • A fine metal file

    How to sharpen log splitter wedge by hand

    Step 1: Examine the wedge:

    Very first thing is to examine the wedge. You are specifically looking for cracks. If there are cracks in the blade, you cannot use that blade again. You shouldn’t sharpen that blade either as replacement is the only real safe option.

    If you do need to replace your wedge, heres the on we recommend because it is made in the USA and is a high quality product, if not, feel free to skip down the page to the sharpening instructions:

    Step 2: Use a COARSE Metal file:

    Over time, the edges of the blade might rollover. You have to deal with these edges using a coarse file. For the sides as well, you will also have to use the coarse file.

    Step 3: Start at the sides:

    First start with the sides of the wedge. This will help you refine the sides and slowly move towards the tip. When you move towards the tip, you will encounter the rolled edges and since the file move against them, straightening them is easy.

    Step 4: Use a FINE metal file:

    The splitting point or the tip of the blades should be filed with the fine metal file. However, you have to ensure that the tip is properly filed from both sides. Only then can you evenly split the logs.

    Using these four simple steps, you can easily sharpen the log splitter wedge.

    If you’re looking for a decent metal file to sharpen your wedge, we recommend this one:

    What are the advantages of a sharp log splitter wedge?

    Sure enough, you’re taking a lot of effort to sharpen the log splitter but do you know the same advantages?

    We will cover those below.

    1. Easy to split:

    When the blades of the log splitter wedge are sharp, the logs are easy to split. Moreover, you can split them into the required size. That way, you will not have to perform the splitting operation on pieces of the same log repeatedly. The result is ready to use log pieces right away.

    1. Can handle logs in bulk:

    When the log splitter wedge is sharp, you can handle a lot of logs in a single day. It will save you time and increase your efficiency.

    You might have noticed that we are dealing with files and blades in the process. That is why undertaking certain safety precautions is a necessity.

    Precautions to take while sharpening log splitter wedge:

    The two safety precautions you need to stick to include:

    1. Use safety gear:

    While dealing with the wedge of blades and the files, you should always wear safety gloves and an eye mask. That way, you are less prone to suffering a cut.

    1. File both sides:

    Many people are in a hurry to use the wedge.

    They do not pay proper attention to both sides. Merely filing a single side of the tip is of no use. It means that the shape of the tip will be different on one side.

    When that happens, there are chances that the log might be of uneven shape. Even more, the log might move swiftly to one side because of the shape of the tip. In that case, the chances of an accident increase manifold.

    To avoid this, simply file the tip on both sides. That way, you will no longer have to worry about uneven cutting off logs or any injury.

    What is the best splitting wedge sharpening angle?

    If it’s a hardwood like oak or maple, then you should use a 45 degree angle. If it’s a softwood like pine or cedar, then you should use a 30 degree angle.

    How do I know when to sharpen my Splitting Maul?

    Easy! The giveaway is simply when your splitting maul bounces off wood when you try and split it. You can also tell just by looking at it, or ‘gently’ running your finger across the blade.

    Should I sharpen a log splitter wedge?

    Yes, absolutely. It’s very important to keep your log splitter wedge sharp so that it is safe to use.

    How do you sharpen a wood splitter axe?

    You sharpen a wood splitter axe in much the same way that you sharpen the wedge above. However, you can also use a grinder to perform the task also.

    Should I sharpen my splitting axe?

    Yes, if you’re asking the question, there is a good chance that your axe is blunt and could be a potential safety risk. If your axe bounces off the wood you are trying to split, it is worth either getting out the metal files, or using the bench grinder to give it a good maintenance sharpen.

    Conclusion:

    Sharpening a log splitter wedge isn’t a difficult task. However, you need to pay proper attention while doing so. Simply follow the guide above, and you will never have an issue with sharpening a log splitter wedge again.

  • Which Log Splitter Design is Best? – An Authoritative Guide

    Which Log Splitter Design is Best? – An Authoritative Guide

    It’s true that you stand to burn as much as 440 calories while cutting, splitting, and stacking firewood. However, it also uses a lot of your time and strength, and can even take its toll on your back.

    Investing in a quality log splitter may be a wise idea if you need wood to keep your stove or fireplace burning. You could purchase one of the types of log splitters below, or you could make your own!

    The only problem lies in deciding which log splitter design is the best as these machines come in various types.  They are available as manual, gas, electric, and hydraulic log splitters, each with its pros and cons.

    Manual Log Splitter Design

    The manual log splitter design is lightweight, easy to store and comes as foot or hand-powered models whereas some may also depend on hydraulics to operate. Though these tools do need some effort to use, it’s much less than swinging axes.

    These splitters are best for splitting small amounts of wood. Though they come in horizontal and vertical varieties, both need manual force to pump the hydraulic handle. The only difference lies in how the log is pushed into the machine.

    What is the best manual log splitter?

    The Kindling Cracker Firewood Kindling Splitter

    >> Check Availability <<

    The Kindling Cracker Firewood Kindling Splitter is a uniquely designed manual log splitter. An Australian school student conceived this patented design as a science fair project. She wanted to create a tool that could be safely split firewood into kindling without risk of injuries.

    The Kindling Cracker is a single top-grade iron splitting head cast in a 12” height cast iron frame having a 6.5” diameter. It effectively splits firewood with less force than an ax without the use of any moving blade or sharp objects. And it’s portable to carry around and use wherever required.

    Making kindling is easy – just place the log inside the iron safety ring and then hit it with a blunt tool like a mallet or hammer. Once driven into the splitting wedge, the wood is split without using any sharp blades.

    There’s no worry about its maintenance as the Cracker Splitter just needs an occasional brushing and at the most, a fresh coat of paint to last for generations.

    Electric log splitters

    Electric log splitters are somewhat popular as they are lighter and more compact and portable than gas splitters. They can split wood while placed on the ground, bench, or a stand- both indoors or outdoors as long as there’s a standard electrical outlet around.

    Outdoor Wood Splitting

    An electric motor powers its hydraulics, so there’s no worry of any fumes like in gas splitters. These splitters are safe to use anywhere and require less maintenance than gas splitters as there is no need of changing any fluids.

    The main drawback of most of these splitters is that they don’t easily split logs measuring more than a foot in diameter. They also cut only seasoned wood well, and as they need a power source, they can’t be used in places where there’s no power.

    What is the best electric log splitter?

    Boss industrial ES7T20 Electric Log Splitter, 7-Ton

    >> Check Availability <<

    The Boss Industrial ES7T20 7-Ton Electric Log Splitter is a different electric splitter. While it’s convenient and portable like most electric log splitter designs, it has a powerful 2HP motor that produces 7 tons of splitting power to handle larger wood splitting projects. And as they don’t emit any harmful emissions like gas-powered units, they are safe for indoor use.

    Logs remain stable while splitting, thanks to its built-in side rails. The splitter is easily maneuvered using its front handle while its automatic ram return feature quickens the wood splitting process.

    The splitter’s patented hydraulic system and its one-hand operation set it apart from others. However it’s not meant for vertical use, and while it splits straight grain wood well, it tends to avoid knots.

    Gas-powered log splitters

    These are the largest and most potent splitters best for splitting robust and more massive diameter logs. As they don’t require a PowerPoint, they can be used anywhere, but not indoors as they burn fuel and exhaust fumes.

    They are also the most expensive splitters but can handle both green and seasoned wood. However, they are somewhat noisy and need regular maintenance like regular oil and air filter changes, spark plug replacements, and fuel refilling.

    What is the best gas-powered log splitter?

    The YARDMAX YS2865 28 Ton Half Beam Gas Log Splitter, Briggs CR950, 6.5HP, 208cc

    >> Check Availability <<

    Yardmax

    The Yardmax 25 Ton Half Beam Gas Log Splitter may be powerful enough to tackle heavy-duty tasks but is compact, rugged, and can be easily assembled by one person. It is structured to split wood either horizontally or vertically where its beam handles easily transition from vertical to a horizontal position and vice versa.

    It splits wood in a rather short cycle time of 9.7seconds, thanks to its oversized hydraulic components.  It comes with dual, large log cradles and a patent-pending log spinner footplate that rotates the wood which in turn reduces beam stress. Its 4-way wedge, which is also awaiting its patent, splits smaller diameter logs into four pieces.

    The Yardmaxx can comfortably accommodate more massive logs up to 26 inches long, thanks to its long table length. Its hydraulic oil filter is prevented from possible damage from falling wood as it is safely located inside the reservoir. The log stripper at the end of the hydraulic cylinder helps remove jammed logs while its patent-pending U-Beam design is stronger than the original I-Beam design.

    Large Hydraulic Log Splitters

    Large hydraulic splitters are also called 3 point log splitters, usually used by professionals as they require a tractor to work. They are towed behind the tractor, and then connected to it for power.

    This is the perfect log splitter design if you have lots of firewood to split as they are really powerful, boasting of the market’s highest tonnage ratings. Though they quickly cut both green and seasoned wood, they are slightly expensive. While they are a good buy for commercial and large-scale tasks, they are not meant for an average small family.

    What is the best large hydraulic log splitter?

    The Sun Joe LJ10M Logger Joe 10 Ton Hydraulic Log Splitter

    >> Check Availability <<

    If you are looking for a log splitter to split logs measuring up to 18” long and 18” wide, then the Sun Joe LJ10M Logger Joe 10 Ton Hydraulic Log Splitter is meant for you. Its powerful hydraulic ram produces a maximum of 10 tons of splitting power that helps you quickly tackle piles of large logs.

    Made of steel, this is a durable splitter meant to serve you for years to come. Its 10 tons of driving force is powered by a manually operated 2-speed pump while its log cradle helps contain the split wood.

    While its compact size provides for convenient storage, its rear wheels provide for easy maneuverability. It’s easy to use with long handles providing maximum leverage while turning a knob resets the ram return spring.

    How to Safely Split Wood Using a Hydraulic Log Splitter

    So there are various log splitter designs and types to choose from. It’s left to you to select the best based on different points like how much wood and the size of the logs you need to split, your budget, and where you will be splitting wood. Who knows, you may, in fact, need more than one splitter like a gas one for bulk tasks, and an electric or manual one for indoor and occasional use!